Home » Standards » Standards for AC Generator

Standards for AC Generator

IEC has issued a range of standards that set out the performance, manufacture and design of AC generator. AC generator driven type is by diesel, gas engine or turbine.

List of codes and standards (not exhausted) is as below:

ReferenceTitle
IEC 60034-1Rotating electrical machines - Part 1: Rating and performance
IEC 60034-2-1
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
IEC 60034-2-2
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
IEC 60034-3
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
IEC 60034-5
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
IEC 60034-6
Rotating electrical machines - Part 6: Methods of cooling (IC Code)
IEC 60034-9
Rotating electrical machines - Part 9: Noise limits
IEC 60034-14
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
IEC 60085Electrical Insulation - Thermal Evaluation and Designation
IEC 61000-2-4Electromagnetic Compatibility (EMC) - Part 2-4: Environment - Compatibility Levels in Industrial Plants for Low-Frequency Conducted Disturbances
IEC 62262Degrees of Protection provided by Enclosures for Electrical Equipment against External Mechanical Impacts (IK Code)

Read more: Electrical Standards

Note:
1. Reader may follow link in standard numbering to verify latest revision in official IEC site.
2. This is a suggested list, reader will alter to suit with Project need.