MV Synchronous Motor Standards set out requirements for the design, manufacture, performance and test of MV Synchronous Motors either fed by a grid (single speed motors) or fed by a Variable Speed Drive (variable speed motors).
List of codes and standards (not exhausted) is as below:
| Reference | Title |
|---|---|
| API STD 546 | Brushless Synchronous - Machines-500 kVA and Larger |
| API STD 617 | Axial and Centrifugal Compressors and Expander-compressors |
| API STD 670 | Machinery Protection Systems |
| IEC 60034-1 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60034-5 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| IEC 60034-6 | Rotating electrical machines - Part 6: Methods of cooling (IC Code) |
| IEC 60034-9 | Rotating electrical machines - Part 9: Noise limits |
| IEC 60034-14 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| IEC 60085 | Electrical Insulation – Thermal Evaluation and Designation |
| IEC TR 60146-1-2 | Semiconductor Converters - General Requirements and Line Commutated Converters - Part 1-2: Application Guide |
| IEC 61000-2-4 | Electromagnetic Compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC 61800-4 | Adjustable Speed Electrical Power Drive Systems - Part 4: General Requirements - Rating Specifications for A.C. Power Drive Systems above 1 000 V A.C. and not Exceeding 35 kV |
| IEC 60072 | Dimensions and Output Series for Rotating Electrical Machines |
| IEC 62262 | Degrees of Protection provided by Enclosures for Electrical Equipment against External Mechanical Impacts (IK Code) |
| IEEE 43 | Recommended Practice for Testing Insulation Resistance of Rotating Machinery |
| IEEE 115 | Guide for Test Procedures for Synchronous Machines Part I-Acceptance and Performance Testing Part II-Test Procedures and Parameter Determination for Dynamic Analysis |
Read more: Electrical Standards
Note:
1. Reader may follow link in standard numbering to verify latest revision in official IEC site.
2. This is a suggested list, reader will alter to suit with Project need.