Home » Engineering » Checklist » Lighting Layout Drawing Preparation Checklist

Lighting Layout Drawing Preparation Checklist

This checklist will be an aid to maintain quality design of lighting layout.

Read more: List of All Checklists

No.DoneChecked Item
1Verify Client Name
2Verify Project Title
3Verify Drawing Title
4Verify Drawing No. & Revision No.
5Verify the Job No. (Project No.)
6Check the reference drawing numbers and titles.
7Are notes and legends correct?
8Is Match Line indicated correctly, when the next drawing is needed for the presentation?
9Is the latest piping plot plan used?
10Is the scale appropriate to drawing size?
11Are the size of characters suitable for drawing size and scale?
12Are the type and width of lines suitable for drawing size and scale?
13Is the location identification of the plant shown on the drawing indicated by North mark, reduced key plan, etc.?
14Check illumination level (by illumination report) at installations to comply with project requirement
15Check the phase load current balance of lighting distribution board.
16Check the provision of space and equipped spare circuit per project requirement (i.e. 20%).
17Check the emergency circuiting and project requirement for emergency lighting.
18Check the power supply condition (voltage, phase)
19Check the provision of Air Craft Warning light per code and standard.
20Check the requirement of a special type of lighting fixture Safety Shower, Eye Washer, Illuminated Level Gauge, etc.
21Check the location of lighting fixture in 3D model to ensure suitable for the operation and maintenance.
22Check the location of lighting panel suitable for the operation and maintenance.
23Check the size of conduit and the number of wires per NEC.
24Check the location and elevation of lighting fixture
25Check the location and elevation of emergency lighting fixture per code and project requirement.
26Check the location of receptacles per project requirement.
27For Level Gauge Lighting Fixture, check the provision of separate switch located near the gauge.